MIMO雷达和组网雷达的CA2CFAR检测性能比较

多输入多输出(MIMO)雷达是近几年出现的一种新雷达技术,也是近几年雷达领域研究的重点。建立MIMO雷达的信号模型,明确给出MIMO雷达进行CA2CFAR检测的检测概率和虚警概率解析表达式,对组网雷达和MIMO雷达在均匀杂波背景下CA2CFAR检测性能进行了分析对比。仿真结果表明。MIMO雷达对类似噪声特性的复杂目标具有更好的检测性能。     

装备体系贡献率评估综述

随着装备体系化作战模式在军事活动中的深入运用,其表现出的优势已被世界军事强国高度关注,装备体系贡献率作为衡量装备成体系化建设与作战运用优劣程度的重要指标,已成为当前军事学术中研究的热点.系统梳理与归纳了国内外对装备体系贡献率评估需求、评估理论、评估方法的研究现状,总结出研究成果中存在的问题,为下一步开展装备体系贡献率研...     

基于故障树分析的航空装备体系结构贡献率评估方法

针对航空装备体系构成复杂的特点,将故障树分析引入航空装备体系结构贡献率评估问题,提出基于故障树分析的评估方法。从作战装备、信息支援装备和保障装备三个方面构建航空装备体系结构,建造航空装备体系结构故障树;采用底事件的关键重要度指标来计算航空装备的体系结构贡献率,建立基于关键重要度的航空装备体系结构贡献率评估模型;以某航空装备体系为例进行建模分析。分析结果表明:所提方法能够准确评估航空装备体系结构贡献率,为确定航空装备体系结构短板、优化航空装备体系结构等提供方法支撑。     

大型船舶流行病传播控制过程多智能体模型

基于复杂网络和传播动力学相关原理,构建了符合大型船舶人员交互特征的社交网络,定义了传播网络层级结构,分析了交互网络拓扑生成的5项规则,给出了大型船舶流行病传播社交网络构成方法。基于多智能体技术,研究了交互网络节点成员属性和流行病传播特点,给出了智能体成员状态空间的基本构成形式,融合防护治疗、管控隔离、信息交互等因素的物理特征,构建了智能体状态迁移和行为交互过程算法,并分析论证了衰减函数的结构及区间特性。对比距离恒定模型和随机游走模型,分别对典型大型船舶流行病传播过程分4种工况12种状态进行了仿真计算,结果表明:随机游走模型更适合信息量丰富条件下的大型船舶流行病早期传播过程模拟仿真和疫情防控策略分析。     

Numerical modelling of non-ideal detonation in ANFO explosives applying Wood-Kirkwood theory coupled with EXPLO5 thermochemical code

Ammonium nitrate and fuel oil (ANFO) based explosive is a classic example of non-ideal high explosives. Its detonation is characterized by a strong dependence of detonation parameters on explosive charge diameter, presence and characteristics of confinement, as well as incomplete consumption of explosive at the sonic point.In this work we propose a detonation model based on the Wood-Kirkwood (WK) theory coupled with the thermochemical code EXPLO5 and supplemented with reaction rate models. Our objective is to analyze the validity of the model for highly non-ideal ANFO explosives, with emphasis on effect of reaction rate models.It was found that both single-step and two-step pressure-based models can be calibrated to reproduce experimental detonation velocity-charge radius data of ANFO at radii significantly above the failure radius (i.e. for D/D_id > ∼0.6). Single-step pressure-based model, with the pressure exponent equal to 1.4, proved to be the most accurate, even in the vicinity of the failure radius. The impact of the rate models is most evident on temporal (and spatial) distribution of flow parameters in detonation driving zone, especially when it comes to the conversion and width of detonation driving zone.     

Increasing of photostability of HNS explosive in the presence of UV photostabilizers

The photostabilies of hexanitrostillbene(HNS)were studied at 1％wt.of photostabilizers.The photo-stabilizers of Chiguard BP-12(UV-531),ADK STAB LA-326(UV-326),ADK STAB LA-32(UV-P),Irganox 1010 and Everstab LS944 were used in this study.A photoreactor including a 30 W monochromatic UV lamp was used for investigation of photodegradations of solid HNS.The changes in surface area of HNS peak in HPLC chromatogram at time intervals of 2,4,6 and 8 h were used for calculation of kinetic rate constants of photodegradation process.The compound of UV-P photostabilizer was found to have the greatest effect on enhancing photostability for HNS among the investigated photostabilizers.The kinetic rate constants were obtained 6.2 × 10-2 and 4.1 × 10-2 h-1,respectively,for photodegradation process of HNS in absence and in presence of UV-P.     

Mechanical behavior and failure mechanism of polyurea nanocomposites under quasi-static and dynamic compressive loading

Polyurea is an elastomeric material that can be applied to enhance the protection ability of structures under blast and impact loading.In order to study the compressive mechanical properties of SiC/polyurea nanocomposites under quasi-static and dynamic loading,a universal testing machine and split Hop-kinson pressure bar(SHPB)apparatus were used respectively.The stress-strain curves were obtained on polyurea and its composites at strain rates of 0.001-8000 s-1.The results of the experiment suggested that increase in the strain rates led to the rise of the flow stress,compressive strength,strain rate sensitivity and strain energy.This indicates that all of the presented materials were dependent on strain rate.Moreover,these mechanical characters were enhanced by incorporating a small amount of SiC into polyurea matrix.The relation between yield stress and strain rates were established using the power law functions.Finally,in order to investigate the fracture surfaces and inside information of failed specimens,scanning electron microscopy(SEM)and micro X-ray computed tomography(micro-CT)were used respectively.Multiple voids,crazes,micro-cracks and cracking were observed in fracture surfaces.On the other hand,the cracking propagation was found in the micro-CT slice images.It is essential to understand the deformation and failure mechanisms in all the polyurea materials.     

线性方程组二级迭代法的收敛速度

二级迭代法由内、外迭代和内迭代次数三部分组成。给出了线性方程组二级迭代法R1-收敛因子的一个上界,这个上界由内、外迭代的R1-收敛因子和内迭代次数所决定,其主部为外迭代的R1-收敛因子。在矩阵单调性条件下,对于任何内迭代方法和任意内迭代次数,证明了外迭代的R1-收敛因子也是二级迭代法R1-收敛因子的下界。所得结果反映了内、外迭代的收敛速度以及内迭代次数对于二级迭代法收敛速度的综合影响。     

Single machine scheduling with a restricted rate‐modifying activity

In this paper we consider the problem of scheduling a set of jobs on a single machine on which a rate‐modifying activity may be performed. The rate‐modifying activity is an activity that changes the production rate of the machine. So the processing time of a job is a variable, which depends on whether it is scheduled before or after the rate‐modifying activity. We assume that the rate‐modifying activity can take place only at certain predetermined time points, which is a constrained case of a similar problem discussed in the literature. The decisions under consideration are whether and when to schedule the rate‐modifying activity, and how to sequence the jobs in order to minimize some objectives. We study the problems of minimizing makespan and total completion time. We first analyze the computational complexity of both problems for most of the possible versions. The analysis shows that the problems are NP‐hard even for some special cases. Furthermore, for the NP‐hard cases of the makespan problem, we present a pseudo‐polynomial time optimal algorithm and a fully polynomial time approximation scheme. For the total completion time problem, we provide a pseudo‐polynomial time optimal algorithm for the case with agreeable modifying rates. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005